|Place of Origin:||Guangdong, China|
|Brand Name:||In Hooper|
|Minimum Order Quantity:||20 Pieces|
|Packaging Details:||Neutral shockproof carton package lined with bubble film|
|Delivery Time:||12-17 working days after payment received|
|Payment Terms:||L/C, T/T, Western Union , Paypal|
|Supply Ability:||7,000pcs per month|
|Color:||Green, Blue, Red, White And RGBW||Led:||1* 3030|
|Material:||316 Stainless Steel||Wire:||20CM|
|Warranty:||3 Years||Beam Angle:||90 Degree|
|Application:||Yacht, Marine Light, Fishing Boats|
25mm 1 inch dia RGBW 316 SUS 12V Thru Hull Transom LED underwater boat lights
Step 1. Carefully measure and mark the light's center position on the outside of the boat with a pencil.
Step 2. After double checking your measurements, chuck a 0.8-inch drill bit into an electric drill and drill through the hull on the marks you made in the previous step.
Step 3. Use a hole saw of the correct diameter to cut the hole, using the smaller hole as a guide for the drill bit.
Step 4. Clean up any rough spots around the hole with sandpaper.
Step 5. Remove the light, then use a scraper to remove any antifouling inside the line back to the original gelcoat.
Step 6. Remove the light, then use a scraper to remove any antifouling inside the line back to the original gelcoat.
Step 7. On the inside of the boat, screw on the retaining nut, then route the wires and connect them to a suitable switch or breaker.
Tag: Thru Hull Transom LED underwater boat lights , 12V boat lights. underwater lights
Contact Person: Mrs. Treacy